Press it down until it latches on and stays securely. Check that hole is big enough to pass over your camera lens. Position top cover with open end to the same direction as open end of the main case.
LB_Camera_Adhesive_Mount_R1.stl (Universal Adhesive Mount)įirst position camera module inside, and secure with three M2x3mm machine screws. 8MP_LB_Camera_Cover.stl (Top Cover for 8MP camera module). 8MP_LB_Camera_Case.stl (Main Bottom part enclosure for 8MP camera module). 5MP_LB_Camera_Cover_R1.stl (Top Cover for 5MP camera module). 
5MP_LB_Camera_Main_Case_R1.3.stl (Main Bottom part enclosure for 5MP camera module). 2 axes mount for Boss LS1630 machine door handle (requires (2) M4 x 30 mm machine screws and (1) M4x10 mm machine screw and M3 nut).ģD print enclosure’s main case, top cover and swivel mount. Tripod Mount (thread 1/4″ tripod nut into the hole). Standard Go Pro Double sided sticky tape (rounded). Double-sided sticky tape (no larger than 27 mm x 20 mm piece). We recommend using PLA filament of your choice. Type of lens is not important, it should work with all of them. Please note that this enclosure fits only official Lightburn camera modules (Files for both 5MP and 8MP version are included). Enclosure swivels up/down on a simple mount and attaches to top of your laser cover with double-sided tape. This enclosure will let you install this camera module to your laser machine. If you using Lightburn software for your laser cutter/engraver, it now supports a camera module. Any reselling or reproduction of this model without our consent is not allowed. 
IMPORTANT! This model is licensed only for NON commercial licence. We also offer a physical version of this product. You will need an access to 3D printer to make final product. NOTE: This is not a physical product, it’s a downloadable STL files for universal mount for Lightburn Camera We now include STL files for both 5 MP and 8 MP (4K) LightBurn camera module enclosures!
0 kommentar(er)
